Onkyo TX-NR5100 7.2-Channel 8K AV Receiver Instruction Manual - English - Page 102
LFE Level, Volume, Mute Level Default Value: -∞ dB, Maximum Volume Default Value: Off
View all Onkyo TX-NR5100 7.2-Channel 8K AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
3. Audio Adjust 3. DTS Change the setting of when DTS signals are input. DTS Auto Surround (Default Value: On) When inputting DTS signals that include extended channel information, the optimum listening mode is automatically selected according to the extended information contained in the input signal and the speaker configuration of this unit when playing in the straight decoding listening mode. On When this function is used Off Audio is played using the same amount of channels in the input signal according to the speaker configuration of this unit. • If this function is set to "Off", the ES Matrix and ES Discrete listening modes cannot be selected. Dialog Control (Default Value: 0 dB) You can increase the volume of dialog portion of the audio up to 6 dB by 1 dB step so that you can hear the dialog easily in noisy atmosphere. • This cannot be set for content other than DTS:X. • Depending on the content, this function may not be selected. Setup 4. LFE Level Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals. LFE Level (Default Value: 0 dB) Select the low-frequency effect (LFE) level of each signal from "0 dB" to "-∞ dB". If the low-frequency effect sound is too strong, select "-20 dB" or "-∞ dB". 5. Volume Change the Volume settings. Mute Level (Default Value: -∞ dB) Set the volume lowered from the listening volume when muting is on. Select a value from "-∞ dB", "-40 dB", and "-20 dB". Maximum Volume (Default Value: Off) Set the maximum value to prevent the volume from becoming too loud. Select a value from "Off", and "50" to "99". Power On Volume (Default Value: Last) Set the volume level of when the power is turned on. Select a value from "Last" (Volume level before entering standby mode), "Min", "0.5" to "99.5" and "Max". • You cannot set a higher value than that of "Maximum Volume". Headphone Level (Default Value: 0.0 dB) Adjust the output level of headphones. Select a value between "-12.0 dB" and "+12.0 dB". 102