Onkyo TX-NR5100 7.2-Channel 8K AV Receiver Instruction Manual - English - Page 114
Miscellaneous, Tuner, Remote ID
View all Onkyo TX-NR5100 7.2-Channel 8K AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
6. Miscellaneous 1. Tuner Change the settings for Tuner. AM / FM Frequency Step (Default Value: 10 kHz / 0.2 MHz) Select a frequency step to suit your residential area. Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz". • When this setting is changed, all radio presets are deleted. Setup 2. Remote ID Change the remote controller ID. Remote ID (Default Value: 1) If multiple ONKYO products are installed in the same room, select the ID for the remote control used with this unit from "1", "2" and "3" to prevent interference between the unit and other ONKYO products. After changing the ID on the main unit, set the same ID on the remote controller as the main unit with the following procedure. While pressing and holding the MODE button, press the following buttons for approx. 3 seconds. • To change the remote controller ID to "1": MOVIE/TV • To change the remote controller ID to "2": MUSIC • To change the remote controller ID to "3": GAME 114