Onkyo TX-NR5100 7.2-Channel 8K AV Receiver Instruction Manual - English - Page 96
Speaker, Configuration
View all Onkyo TX-NR5100 7.2-Channel 8K AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
2. Speaker 1. Configuration Change the settings of connection environment of the speakers. Speaker Channels (Default Value: 7.1 ch) Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or "5.1.2 ch" to suit the number of speaker channels connected. Subwoofer (Default Value: Yes) Set whether a subwoofer is connected or not. Yes When a subwoofer is connected No When a subwoofer is not connected Height Speaker (Default Value: Top Middle) Set the speaker type when height speakers are connected. Select from "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", "Dolby Speaker (Surr)", "Front High" and "Top Front" according to the type and layout of the connected speakers. • If an item cannot be selected even though connection is correct, check that the settings in "Speaker Channels" matches the number of connected channels. Zone B Speaker (Default Value: No) Set whether speakers are connected to ZONE B speaker terminals. • This setting cannot be selected when "Speaker Channels" is set to "6.1 ch", "7.1 ch", "4.1.2 ch" or "5.1.2 ch". Yes When speakers are connected to ZONE B speaker terminals No When speakers are not connected to ZONE B speaker terminals • This setting is fixed to "No" when "Bi-Amp" is set to "Yes". Setup Zone B Output Level (Default Value: Fixed) When audio is output to ZONE B, set whether the volume is adjusted with the integrated amplifier in the separate room or with this unit. • This setting is fixed to "Variable" when "Zone B Speaker" is set to "Yes". Fixed Variable When adjusting with the integrated amplifier in the separate room When adjusting with this unit Bi-Amp (Default Value: No) Set whether the front speakers are bi-amp connected. • This setting cannot be selected when surround back speakers or height speakers are used. No When front speakers are not bi-amp connected • This setting is fixed to "No" when "Zone B Speaker" is set to "Yes". Yes When front speakers are bi-amp connected Speaker Impedance (Default Value: 6ohms or above) Set the impedance (Ω) of the connected speakers. • For impedance, check the indications on the back of the speakers or their instruction manual. 4ohms When any of the connected speakers have 4 Ω or more to less than 6 Ω impedance 6ohms or above When all the connected speakers have an impedance of 6 Ω or more 96