Onkyo TX-NR5100 7.2-Channel 8K AV Receiver Instruction Manual - English - Page 113
Connected Device Default Value, Preset Volume Default Value: Main=Last
View all Onkyo TX-NR5100 7.2-Channel 8K AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
5. Hardware Bluetooth Wakeup (Default Value: Off) This function wakes up the unit on standby by connecting a BLUETOOTH enabled device. On When this function is used • When this function is set to "On", the power consumption in standby state increases, however, the increase in power consumption is minimized by automatically entering the HYBRID STANDBY mode where only the essential circuits operate. Off When this function is not used • This setting is fixed to "Off" if "Bluetooth" -"Bluetooth Receiver" is set to "Off". • This setting is also fixed to "Off" if "Bluetooth" - "Bluetooth Receiver" - "Auto Input Change" is set to "Off". • Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be selected. It can be selected when the network function is activated. Setup 5. Works with SONOS Change the settings to connect with the Sonos Connect. Input Selector (Default Value: Off) Select the input selector to which the Sonos Connect is connected. • Selecting "Off" disables the interlock function with Sonos. Connected Device (Default Value: -) Displays the Sonos Connect connected to the same network as the network of this unit. Press the ENTER button to select the connected Sonos Connect. • Products (e.g. Play:3 unequipped with an output terminal) other than the Sonos Connect are also displayed in the device list and selectable. In that case, when playback on the Sonos side starts, the input is switched, however, audio is not output. Select the room name of the connected Sonos Connect. • Up to 32 devices can be displayed on the Sonos product list screen. If you cannot find the Sonos Connect to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again. • To use this function, set "Input Selector" beforehand. Preset Volume (Default Value: Main=Last) You can set the volume beforehand for playing back the Sonos Connect. Select a value from "Last" (Volume level before entering standby mode), "Min", "0.5" to "99.5" and "Max". • To use this function, set "Input Selector" beforehand. 113