Onkyo TX-NR5100 7.2-Channel 8K AV Receiver Instruction Manual - English - Page 88
Connecting a transmitter for playback, Connections, Playing Back
View all Onkyo TX-NR5100 7.2-Channel 8K AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Playback Connecting a transmitter for playback When you connect wireless headphones or a wireless speaker transmitter to the ZONE B PRE/LINE OUT terminal of this unit, you can play back the same source through the wireless headphones or wireless speakers as in the main room. Connections Playing Back 1. Use an analog audio cable to connect the ZONE B PRE/LINE OUT terminal on this unit to the input terminal on the transmitter. a Transmitter 1. Press the Q button on the remote controller and select "Audio" - "Zone B". 2. Select the audio output destination. Off: Outputs audio only from ZONE A. "A" on the display of the main unit lights up. On (A+B): Outputs audio from both ZONE A and ZONE B. "A" and "B" on the display of the main unit light up. On (B): Outputs audio only from ZONE B. "B" on the display of the main unit lights up. 3. Start play on the AV component. 4. Adjust the volume on the transmitter, etc., in ZONE B. • If "On (A+B)" is selected as an audio output destination, you can select only the "Stereo" listening mode for ZONE A when using the 2.1 ch speaker layout. When using a speaker layout of 3.1 ch or more, you can select only the "AllCh Stereo" listening mode. a Analog audio cable 88