Optoma EH505 User Guide - Page 82
Pull out the lamp module., To replace the lamp module, reverse the previous steps.
View all Optoma EH505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Appendices 4 1. Switch off the power to the projector by pressing the Power button. 2. Allow the projector to cool down at least 30 minutes. 3. Disconnect the power cord. 4. Unlock the lamp cover. 5. Pull up and remove the cover. 6. Use a screwdriver to remove the screws from the lamp module. 7. Pull out the lamp module. To replace the lamp module, reverse the previous steps. After replacing the lamp, the lamp hours counter must be reset. See page 63 for more information. English 82
English
82
4
1. Switch off the power to the projector by pressing the Power button.
2. Allow the projector to cool down at least 30 minutes.
3. Disconnect the power cord.
4. Unlock the lamp cover.
5. Pull up and remove the cover.
6. Use a screwdriver to remove the screws from the lamp module.
7. Pull out the lamp module.
To replace the lamp module, reverse the previous steps.
After replacing the lamp, the lamp hours counter must be reset. See
page 63 for more information.
Appendices