Optoma W416 User manual - Page 53
Replacing the lamp (continued), Lamp Reset: i Press Menu
View all Optoma W416 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
MAINTENANCE Replacing the lamp (continued) 2 3 4 5 1 Procedure: 1. Switch off the power to the projector by pressing the " " button on the remote control or the projector keypad. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the screw on the cover. 1 5. Open the cover. 2 6. Unscrew the screw on the lamp module. 3 7. Lift up the lamp handle. 4 8. Remove the lamp module carefully. 5 9. To replace the lamp module, reverse the previous steps. 10. Turn on the projector and reset the lamp timer. Lamp Reset: (i) Press "Menu" > (ii) Select "Setup" > (iii) Select "Lamp Settings" > (iv) Select "Lamp Reset" > (v) Select "Yes". English 53
English
53
MAINTENANCE
Replacing the lamp (continued)
1
3
4
2
5
Procedure:
Switch off the power to the projector by pressing the "
1.
" button on the remote control or the projector
keypad.
Allow the projector to cool down for at least 30 minutes.
2.
Disconnect the power cord.
3.
Unscrew the screw on the cover.
4.
1
Open the cover.
5.
2
Unscrew the screw on the lamp module.
6.
3
Lift up the lamp handle.
7.
4
Remove the lamp module carefully.
8.
5
To replace the lamp module, reverse the previous steps.
9.
Turn on the projector and reset the lamp timer.
10.
Lamp Reset: (i) Press "Menu"
> (ii) Select "Setup" > (iii) Select "Lamp Settings" >
(iv) Select "Lamp
Reset" > (v) Select "Yes".