Optoma ZU500T-W ZH500T User Manual - Page 47

Installing and Cleaning the Optional Dust Filter

Get Optoma ZU500T-W PDF manuals and user guides View all Optoma ZU500T-W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

APPENDICES Installing and Cleaning the Optional Dust Filter We recommend you clean the dust filter every 500 hours of operation, or more often if you are using the projector in a dusty environment. When the warning message appears on the screen, do the following to clean the air filter: Note: The optional dust filter should be used in dusty environments. If the dust filter is installed, a proper maintenance will prevent overheat- ing and projector malfunction. The dust filter is optional. The specific inter- faces are selected in terms of the specifications of types. 1 2 3 Air Filter Cleaning Procedure: 1. Switch off the power to the projector by pressing the " " button. 2. Disconnect the power cord. 3. Pull out the dust filter, as shown in the illustration.① 4. Carefully remove the dust filter. Then clean or change the filter. ② To install the filter, reverse the previous steps. 5. Turn on the projector and reset the filter usage counter after the dust filter is replaced. English 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
English 47
APPENDICES
Air Filter Cleaning Procedure:
1. Switch off the power to the projector by pressing the “
” button.
2. Disconnect the power cord.
3. Pull out the dust filter, as shown in the illustration.
①
4. Carefully remove the dust filter. Then clean or change the filter.
②
To install the filter, reverse the previous steps.
5. Turn on the projector and reset the filter usage counter after the dust filter is
replaced.
Installing and Cleaning the Optional Dust Filter
We recommend you clean the dust filter every 500 hours of operation, or more often if you are using the projector
in a dusty environment.
When the warning message appears on the screen, do the following to clean the air filter:
Note:
The optional dust filter should be used in dusty environments.
If the dust filter is installed, a proper maintenance will prevent overheat- ing and projector malfunction.
The dust filter is optional.
The specific inter- faces are selected in terms of the specifications of types.
2
3
1