Optoma ZU500T-W ZH500T User Manual - Page 7

Safety notice COMPLIES WITH 21 CFR 1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER NOTICE No. 50, DATED JUNE 24, 2007. IEC/EN 60825-1:2007 LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT WAVE LENGTH: 450-460 nm / MAX OUTPUT: 15.9 mW / PULSE DURATION: 1.25 ms IEC 60825-1:2014 CLASS 1 LASER PRODUCT / RISK GROUP 2 Possibly hazardous optical radiation emitted from this product. Do not stare into the beam, May be harmful to the eyes. IEC 60825-1:200 -460 nm / IEC 60825-1:2014 1 2 : 15.9 mW / / 2 : 1.25 ms , RAYONNEMENT LASER NE PAS REGARDER DANS LE PRODUIT LASER DE CLASSES DE FAISCEAU 2. LONGUEUR D'ONDE 450-460 nm / MAX SORTIE 15.9 mW / DURÉE PULSE 1.25 ms IEC 60825-1:2014 PRODUIT LASER DE CLASSE 1 / GROUPE A RISQUE 2 Risques possibles de rayonnements optiques émis par ce produit. Ne pas regarder dans le faisceau. Peut être dangereux pour les yeux. WARNING - This product is classified as Class 2 of IEC 60825-1 : 2007 and also complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. IEC 60825-1:2014: CLASS 1 LASER PRODUCT - RISK GROUP 2 - Explanatory label is shown all information of laser power. - This projector has built-in Class 4 laser module. Disassembly or modification is very dangerous and should never be attempted. - Any operation or adjustment not specifically instructed by the user's guide creates the risk of hazardous laser radiation exposure. - Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation. - Do not stare into beam when the projector is on. The bright light may result in permanent eye damage. - When turning on the projector, make sure no one within projection range is looking at the lens. - Without following the control, adjustment or operation procedure may cause damage by the exposure of laser radiation. - Adequate instructions for assembly, operation, and maintenance, including clear warnings concerning precau- tions to avoid possible exposure to laser and collateral radiation in excess of the accessible emission limits in Class 2. - This projector is a Class 2 laser device that conforms with IEC 60825-1:2007 and CFR 1040.10 and 1040.11. - Class 2 laser product, Do Not Stare Into Beam. - This projector has built-in Class 4 laser module. Disassembly or modification is very dangerous and should never be attempted. - Any operation or adjustment not specifically instructed by the user's guide cre- ates the risk of hazardous laser radiation exposure. - Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation. - Do not stare into beam when the projector is on. The bright light may result in permanent eye damage. - Without following the control, adjustment or operation procedure may cause damage by the exposure of laser radiation. - Adequate instructions for assembly, operation, and maintenance, including clear warnings concerning precautions to avoid possible exposure to laser and collateral radiation in excess of the accessible emission limits in Class 2. English 7