Panasonic 52DL52 Operating Instructions - Page 32
Clock Phase/dot, Clock
View all Panasonic 52DL52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
PICTURE Adjustment CLOCK PHASE/DOT CLOCK CLOCK PHASE and DOT CLOCK are valid only during PC input mode. When an RGB signal is projected, minor adjustments of the DOT CLOCK frequency and adjustments of the phase can be made. 1 In PICTURE menu press to select PC ADJ. Press to enter submenu field. In PC ADJ. submenu field press to select CLOCK PHASE or DOT CLOCK. Press to adjust the level. CLOCK PHASE: DOT CLOCK: 0 - +31 -8 - +8 CLOCK PHASE: DOT CLOCK: Phase adjustment. Flickering or bleeding of the contour appearing on the screen when projecting a PC signal, can be adjusted so that it does not appear. During PC setting in DIGITAL-IN input mode, the adjustment range is 0-1. Minor adjustments of the dot clock frequency. When a PC signal is projected, the display area of the computer image can be adjusted. During PC setting in DIGITAL-IN input mode, adjustment is not available. Note: The DOT CLOCK advances in increments of 2. SIZE SIZE is valid only during 720 x 1280 RGB signal input in DIGITAL-IN mode. In PICTURE menu press to select PC ADJ. Press to enter submenu field. In PC ADJ. submenu field press to select SIZE. Press to select 1 or 2. SIZE1: Over scan (Native) SIZE2: Under scan (compression) 32