Panasonic AG-HPX600PJ Operating Instructions - Page 90

Chapter 5 Preparation - Power supply Power supply A battery or an external DC power supply can be used as power supply. Using batteries Batteries with validated connection with the camera are as follows. rr Anton/Bauer batteries HYTRON50, HYTRON140 DIONIC90, DIONIC160, DIONIC HC rr IDX batteries ENDURA7, ENDURA10, ENDURA HL9 rr PAG batteries PAG L96e @@NOTE tt Other batteries may be supported by changing the setting menu, but we recommend that you use batteries with connection to the camera validated. tt Before you use a battery, charge it with a battery charger. (For details on charging, refer to each instruction operation.) Mounting and setting battery Using Anton/Bauer batteries 1 Mount an Anton/Bauer battery. Power supply output terminal for lighting 2 Insert the battery, and slide it in the direction of the arrow. Release lever Anton/Bauer battery Light control switch @@NOTE tt The Anton/Bauer battery holder includes both a power supply output terminal for lighting and a light control switch, which are convenient when installing light. Contact Anton/Bauer, Inc. for details on lighting systems. @@NOTE tt To remove the battery, keep the release lever of the battery holder completely down, slide the battery in the opposite direction of when you mounted it. 3 Set the battery type. Set the battery type with the [BATTERY SELECT] item on the setting menu [BATTERY SETUP] screen. For details, refer to "Setting menu basic operations" (page 118). Using V-mount type batteries Mount the V-mount adaptor plate. As shown in the figure, insert and slide in the direction of the arrow. ffWhen removing the plate, remove by sliding the release lever. Release lever - 90 -