Panasonic AW-SF100/SF200 AW-SF100 API Documentation - Page 18

Auto Tracking System Web API Specifications Version 1.6 3.9 Tracking Control The Tracking Control command is used to enable or disable the tracking process. The list of transmission parameters is as shown below. Name id enable Table 3.9-1 List of Transmission Parameters Usage Type Description Mandatory Mandatory Integer value String This is the camera ID. Either on or off is saved. The processing contents during parameter setting are same as those described below: For "on" • Camera Setting: detection = auto • Tracking: process = start For "off" • Camera Setting: detection = manual • Tracking: process = stop The reception response is saved as either "ack", which indicates a positive acknowledgment, or "nack", which indicates a negative acknowledgment. Confidential © 2014-2015 Panasonic. All Rights Reserved. 18 of 24