Panasonic AW-SF100/SF200 AW-SF100 API Documentation - Page 7

Auto Tracking System Web API Specifications Version 1.6 3.2 Camera Setting The Camera Setting command is used to acquire or change the settings of the camera managed by Tracking Control. 3.2.1 Acquiring the Settings The list of transmission parameters during acquisition of camera settings is described below. Table 3.2-1 List of Transmission Parameters Name Usage Type Description id Mandatory Integer value This is the camera ID. The reception response parameters during acquisition of camera settings are specified as below. id:[1],name:[2],ip_addr:[3],port_no:[4],login:[5],password[6],zoom:[7],height:[8],distance:[9],angl e:[10],angle_mode:[11],angle_zoom:[12],detection:[13],lost:[14],lost_action_wait_sec:[15],auto_s tart:[16],sensitivity:[17],disable_area[18],detect_area[19],template_matching_level[20],scene_file _name:[21], face_recognition:[22],face_recognition_id:[23],upper_body_detection:[24] The camera setting information is saved in the below-mentioned format at the locations corresponding to the numbers enclosed within "[ ]". Note that when the camera ID is invalid, "nack", which indicates a negative acknowledgment, is saved, and the response parameter described above is not saved. No. Name 1 id 2 name 3 ip_addr 4 port_no 5 login 6 password 7 zoom 8 height 9 distance 10 angle 11 angle_mode Confidential Table 3.2-2 List of Values Type Description Integer value This is the camera ID. String This is the name of the camera. String This is the IP address or host name of the camera. Integer value This is the port number of the camera. String This is the login account of the camera. String Integer value Integer value Integer value Integer value Integer value This is the login password of the camera. This is the upper-limit value (0 to 100) of magnification during the tracking process. This is the installation height of the camera (T.B.D) This is the installation distance of the camera from the platform (T.B.D) This is the installation angle of the camera from the platform (T.B.D) Indicates the automatic calculation setting of the Angle command for the Upper Body, Full Body, and Full Shot by delimiting with a comma. 0: Manual (use the value set by the user) 1: Auto © 2014-2015 Panasonic. All Rights Reserved. 7 of 24