Panasonic CF-18FCAZXVM Notebook Computer - Page 34

Dealing with Problems (Summary) Touch Pad / Digitizer The cursor cannot be controlled properly The cursor does not move in scrolling area of the touch pad Unable to input using the touch pad Unable to use the digitizer function If you are using an external mouse, ensure that the external mouse has been connected correctly. Restart the computer by using the keyboard (Press , U , and select [Restart] with R ). If the computer does not respond to keyboard commands, read "No response" ( page 35). When the Microsoft® IntelliMouse™ Wheel mode or the original mode is set for the touch pad, only scroll operations are possible for the right part or bottom part of the touch pad. In this case, cursor operations are possible by using the work surface excluding the right part or bottom part. When no mode is set, the entire surface of the touch pad can be used for cursor operations. Has the Setup Utility been used to set [Touch Pad] to [Enable]? When external mouse drivers are installed (e.g., Intellimouse), the touch pad may not be used. Has the touch pad driver been properly installed? Has the Setup Utility been used to set [Digitizer] to [Enable]? You can use only the pen included with the computer to use the digitizer function. It is necessary to perform [Calibration] to point correctly with the pen included with the computer. Display Rotation The display is not rotated automatically by switching from Laptop mode to Tablet mode, or vice versa The display fails to rotate even when the rotation button is pressed When the screensaver starts while the display is rotated, nothing is displayed on the screen Confirm that the default angle of each mode is correctly set. ( "Display Rotation") Do not switch from Laptop mode to Tablet mode, or vice versa, while Windows is in the process of switching users with the Fast User Switching function. Close the applications which are open. Some screensaver types do not display anything on the screen for the first minute or so. Try changing the screensaver type. Troubleshooting Reference Manual The Reference Manual is not displayed Is Adobe Reader installed? If you have uninstalled Adobe Reader, install using the following procedures. 1 Select [start] - [Run], input [c:\util\reader\AdbeRdr60_enu_full.exe], then select [OK]. Install Adobe Reader by following the instructions on the screen. 2 Update Adobe Reader to its latest version. If your computer is connected to the Internet, start up Adobe Reader and select [Help] - [Update]. If your computer is not connected to the Internet, select [start] - [Run], input [c:\util\reader\Acro-Reader_6.0.2_Update.exe], then select [OK]. Fast User Switching Function Some applications may not When switching to a different user with the Fast User Switching function, the following work properly problems may occur. • Some applications may not work properly. • Key combinations with the Fn key may not work. • It may not be possible to set the settings of the display. • Wireless LAN may not work. In this case, log off all users without using Fast User Switching function, and try the 34 operation once more. If the problem persists, restart the computer.