Panasonic CF51MCMDDBM CF51LCCDDBM User Guide - Page 29
Changing the drive letter
View all Panasonic CF51MCMDDBM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
z To select [3], the first partition size must be 6 GB or more of the hard disk size. Reinstallation cannot be performed with a small partition size. J At the confirmation message, press Y. The operation of reinstallation for the hard disk starts automatically. (The operations take about 15 minutes.) z Do not interrupt the reinstallation procedure before completion, for example by turning off the computer or pressing Ctrl + Alt + Del, as this may prevent Windows from starting up, or may cause data to be lost so that the reinstallation procedure cannot be executed. K After the reinstallation procedure completes, the screen should appear. Remove the Product Recovery DVD-ROM, and then press any key. The computer will be shut down. L Turn on the computer, and press F2 while [Panasonic] boot screen is displayed. The Setup Utility will start up. If the password has been set, enter the Supervisor Password. M Press F9. At the confirmation message, select [Yes] and then press Enter. (The Setup Utility settings will return to their default values. Even the security settings with the exception of the password(s) will return to their default values.) N Select [Exit] and then select [Save Current Values], then press Enter. At the confirmation messages, select [Yes] and press Enter. O Turn the computer off by using the power switch. z If additional instructions are included with the computer, be sure to read them. It may be necessary to perform additional operations during the following procedures. P Perform the first-time use operation. (Î page 10) Q Run the Setup Utility and change the settings where necessary. Changing the drive letter You can change the drive letter for the CD/DVD drive or hard disk drive by the following steps. z Drive letters can only be changed when two or more partitions have been created on the hard disk drive. The name of the C: drive cannot be changed. z We recommend that you make these changes before installing applications. A Select [start] - [Control Panel] - [Performance and Maintenance] [Administrative Tools] - [Computer Management]. B Select [Disk Management] from [Storage]. C Right click on the partition of the hard disk or the name of the CD/DVD drive and select [Change Drive Letter and Paths...]. D Select [Change]. E Select [Assign the following drive letter] and the new drive letter, and then select [OK]. F At the confirmation message, select [Yes]. 29 Troubleshooting