Panasonic DMC FS7G Digital Still Camera - Page 16
About the Built-in Memory/the Card
UPC - 037988988693
View all Panasonic DMC FS7G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Preparation ∫ Using an AC adaptor (optional) and a DC coupler (optional) instead of the battery Ensure that the AC adaptor (DMW-AC5PP; optional) and DC coupler (DMW-DCC4; optional) are purchased as a set. Do not use if sold separately. 1 Open the card/battery door. 2 Insert the DC coupler, being careful of the direction. 3 Close the card/battery door. • Ensure that the card/battery door is closed. 4 Open the DC coupler cover A. • If it is difficult to open, push open the coupler cover from the interior with the card/battery door in an open state. 5 Plug the AC adaptor into an electrical outlet. 6 Connect the AC adaptor B to the [DC IN] socket C of the DC coupler. D Align the marks, and insert. • Ensure that only the AC adaptor and DC coupler for this camera are used. Using any other equipment may cause damage. Note • Always use a genuine Panasonic AC adaptor (DMW-AC5PP; optional). • Some tripods cannot be attached when the DC coupler is connected. • This unit cannot stand upright when the AC adaptor is connected. When operating it on a flat surface, we recommend placing it on a soft cloth. • Make sure to unplug the AC adaptor when you open the card/battery door. • If the AC adaptor and DC coupler are not necessary, then remove them from the digital camera. Also, please keep the DC coupler cover closed. • Also read the operating instructions for the AC adaptor and DC coupler. • For information about optional accessories, refer to the "Digital Camera Accessory System". (P110) • We recommend you use a battery with sufficient battery power or the AC adaptor when recording motion pictures. • If while recording motion pictures using the AC adaptor the power supply is cut off due to a power cut or if the AC adaptor is disconnected etc., the motion picture being recorded will not be recorded. About the Built-in Memory/the Card The following operations can be performed using this unit. • When a card has not been inserted: Pictures can be recorded in the built-in memory and played back. • When a card has been inserted: Pictures can be recorded on the card and played back. • When using the built-in memory k>ð (access indication¢) • When using the card † (access indication¢) ¢ The access indication lights red when pictures are being recorded on the built-in memory (or the card). 16 VQT2C70