Panasonic DMC FS7G Digital Still Camera - Page 41

Shutter speed for each flash setting, When [AUTO LCD OFF] is set, the LCD monitor

Get Panasonic DMC FS7G - Lumix Digital Camera PDF manuals and user guides
UPC - 037988988693
View all Panasonic DMC FS7G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Advanced (Recording pictures) • In [HIGH SENS.] (P51) in Scene mode, the ISO sensitivity automatically switches to between [ISO1600] and [ISO6400] and the available flash range also differs. Wide: Approx. 1.15 m (3.77 feet) to approx. 16.0 m (52.5 feet) Tele: Approx. 90 cm (2.96 feet) to approx. 7.5 m (24.6 feet) • In [FLASH BURST] (P52) in Scene mode, the ISO sensitivity automatically switches to between [ISO100] and [ISO3200] and the available flash range also differs. Wide: Approx. 30 cm (0.99 feet) to approx. 4.0 m (13.1 feet) Tele: Approx. 50 cm (1.64 feet) to approx. 1.9 m (6.23 feet) ∫ Shutter speed for each flash setting Flash setting ‡ Shutter speed (Sec.) 1/30 to 1/2000 ‰ Flash setting Shutter speed (Sec.) 1 or 1/8 to 1/2000¢1 1 or 1/4 to 1/2000¢2 Œ ¢1 The shutter speed changes depending on the [STABILIZER] (P65) setting. ¢2 When Intelligent ISO is set (P61) • ¢1, 2: The shutter speed becomes a maximum of 1 second in the following cases. - When the Optical image stabilizer is set to [OFF]. - When the camera has determined that there is little jitter when the Optical image stabilizer is set to [MODE1], [MODE2] or [AUTO]. • In Intelligent auto mode, shutter speed changes depending on the identified scene. • In Scene mode, shutter speed will be different from the above table. Note • If you bring the flash too close to an object, the object may be distorted or discolored by the heat or lighting from the flash. • When you take a picture beyond the available flash range, the exposure may not be adjusted properly and the picture may become bright or dark. • When the flash is being charged, the flash icon blinks red, and you cannot take a picture even when you press the shutter button fully. When [AUTO LCD OFF] is set, the LCD monitor turns off and the status indicator lights. • The white balance may not be properly adjusted if the flash level is insufficient for the subject. • When the shutter speed is fast, the flash effect may not be sufficient. • It may take time to charge the flash if you repeat taking a picture. Take a picture after the access indication disappears. • The red-eye reduction effect differs between people. Also, if the subject was far away from the camera or was not looking at the first flash, the effect may not be evident. VQT2C70 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
41
VQT2C70
Advanced (Recording pictures)
• In [HIGH SENS.] (P51) in Scene mode, the ISO sensitivity automatically switches to between
[ISO1600] and [ISO6400] and the available flash range also differs.
• In [FLASH BURST] (P52) in Scene mode, the ISO sensitivity automatically switches to
between [ISO100] and [ISO3200] and the available flash range also differs.
∫
Shutter speed for each flash setting
¢
1
The shutter speed changes depending on the [STABILIZER] (P65) setting.
¢
2 When Intelligent ISO is set (P61)
•
¢
1, 2: The shutter speed becomes a maximum of 1 second in the following cases.
– When the Optical image stabilizer is set to [OFF].
– When the camera has determined that there is little jitter when the Optical image stabilizer is
set to [MODE1], [MODE2] or [AUTO].
• In Intelligent auto mode, shutter speed changes depending on the identified scene.
• In Scene mode, shutter speed will be different from the above table.
Note
• If you bring the flash too close to an object, the object may be distorted or discolored by the
heat or lighting from the flash.
• When you take a picture beyond the available flash range, the exposure may not be adjusted
properly and the picture may become bright or dark.
• When the flash is being charged, the flash icon blinks red, and you cannot take a picture even
when you press the shutter button fully.
When [AUTO LCD OFF] is set, the LCD monitor
turns off and the status indicator lights.
• The white balance may not be properly adjusted if the flash level is insufficient for the subject.
• When the shutter speed is fast, the flash effect may not be sufficient.
• It may take time to charge the flash if you repeat taking a picture. Take a picture after the
access indication disappears.
• The red-eye reduction effect differs between people. Also, if the subject was far away from the
camera or was not looking at the first flash, the effect may not be evident.
Wide:
Approx. 1.15 m (3.77 feet) to approx. 16.0 m (52.5 feet)
Tele:
Approx. 90 cm (2.96 feet) to approx. 7.5 m (24.6 feet)
Wide:
Approx. 30 cm (0.99 feet) to approx. 4.0 m (13.1 feet)
Tele:
Approx. 50 cm (1.64 feet) to approx. 1.9 m (6.23 feet)
Flash setting
Shutter speed (Sec.)
Flash setting
Shutter speed (Sec.)
‡
1/30 to 1/2000
1 or 1/8 to 1/2000
¢
1
1 or 1/4 to 1/2000
¢
2
‰
Œ