Panasonic DMC FS7G Digital Still Camera - Page 97
Recording, The recorded picture is too bright or dark.
UPC - 037988988693
View all Panasonic DMC FS7G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Others Recording The picture cannot be recorded. • Is the [REC]/[PLAYBACK] selector switch at the [!] setting? (P27) • Is there any memory remaining on the built-in memory or the card? > Delete the pictures which are not necessary to increase the available memory. (P36) The recorded picture is whitish. • The picture can become whitish if there is dirt e.g. fingerprints on the lens. > If the lens is dirty, turn on the camera, eject the lens barrel (P11) and gently wipe the lens surface with a soft dry cloth. The area around where the pictures were taken becomes dark. • Was this picture taken with the flash at the close range when the zoom is near [W] (1k)? > Zoom in a little, and then take the pictures. (P33) The recorded picture is too bright or dark. > Check that the exposure is correctly compensated. (P44) 2 or 3 pictures are taken at one time. > Set Auto bracket (P45), [HI-SPEED BURST] (P52), [FLASH BURST] (P52) in Scene mode or [BURST] (P64) of the [REC] mode menu to [OFF]. The subject is not focused properly. • The focus range varies depending on the Recording mode. > Set to the proper mode for the distance to the subject. • The subject is beyond the focus range of the camera. (P31) • There is camera shake (jitter) or the subject is moving slightly. (P32) The recorded picture is blurred. The Optical image stabilizer is not effective. > The shutter speed becomes slower when pictures are taken in dark places so hold the camera firmly with both hands to take the pictures. (P28) > When taking pictures at a slow shutter speed, use the self-timer. (P43) Taking pictures using Auto bracket is not possible. • Is the number of recordable pictures 2 or less? The recorded picture looks rough. Noise appears on the picture. • Is the ISO sensitivity high or the shutter speed slow? (ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures indoors etc. noise will appear.) > Decrease the ISO sensitivity. (P61) > Set [COLOR MODE] to [NATURAL]. (P65) > Take pictures in bright places. • Has [HIGH SENS.] or [HI-SPEED BURST] in the Scene mode been set? If so, the resolution of the recorded picture decreases slightly because of high sensitivity processing, but this is not a malfunction. VQT2C70 97