Panasonic DMC FS7G Digital Still Camera - Page 17

Preparation Built-in Memory • Memory size: Approx. 50 MB • Recordable motion pictures: QVGA (320k240 pixels) only • The built-in memory can be used as a temporary storage device when the card being used becomes full. • You can copy the recorded pictures to a card. (P80) • The access time for the built-in memory may be longer than the access time for a card. Card The following types of cards can be used with this unit. (These cards are indicated as card in the text.) Type of card Characteristics SD Memory Card (8 MB to 2 GB) (Formatted using the FAT12 or FAT16 • Fast recording and writing speed • Write-Protect switch A provided (When A format in compliance with the SD this switch is set to the [LOCK] position, standard) no further data writing, deletion or SDHC Memory Card (4 GB to 32 GB)¢ (Formatted using the FAT32 format in compliance with the SD standard) formatting is possible. The ability to write, delete and format data is restored when the switch is returned to its original position.) 2 MultiMediaCard • Still pictures only. ¢ The SDHC Memory Card is a memory card standard decided by the SD Association in 2006 for high capacity memory cards more than 2 GB. ¢ You can use an SDHC Memory Card in equipment that is compatible with SDHC Memory Cards however you cannot use an SDHC Memory Card in equipment that is only compatible with SD Memory Cards. (Always read the operating instructions for the equipment being used.) • You can only use cards with SDHC logo (indicating compliance with the SD standard) if using cards with 4 GB or more capacity. • Please confirm the latest information on the following website. http://panasonic.co.jp/pavc/global/cs (This Site is English only.) Note • Do not turn this unit off, remove its battery or card, or disconnect the AC adaptor (DMW-AC5PP; optional) when the access indication is lit [when pictures are being written, read or deleted, or the built-in memory or the card is being formatted (P25)]. Furthermore, do not subject the camera to vibration, impact or static electricity. The card or the data on the card may be damaged, and this unit may no longer operate normally. If operation fails due to vibration, impact or static electricity, perform the operation again. • The data on the built-in memory or the card may be damaged or lost due to electromagnetic waves, static electricity or breakdown of the camera or the card. We recommend storing important data on a PC etc. • Do not format the card on your PC or other equipment. Format it on the camera only to ensure proper operation. (P25) • Keep the Memory Card out of reach of children to prevent swallowing. VQT2C70 17