Panasonic DMC-FX5 Digital Still Camera - Page 99
Connecting To A Printer
UPC - 037988977581
View all Panasonic DMC-FX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Playback (advanced) Connecting to a Printer By connecting the camera directly to a printer supporting PictBridge or USB Direct-Print via the USB connection cable (supplied), you can select the pictures to be printed or start printing. DIGITAL AV OUT DC IN EXT. 1 Turn the camera on and then set the [USB MODE] to [PTP] (PictBridge) or [Mass Storage] (USB Direct-Print). (P94) 2 Turn on a printer. 3 Connect the camera to the printer via the USB connection cable (supplied). ¬Suggestions/Tips ¬ • Ask the manufacturer of the printer about the corresponding models. (Read the printer operating instructions too.) • If the remaining battery power becomes low during communication, the status indicator blinks and the alarm beeps. In this case, stop the communication. Then turn the camera off and charge the battery. • When connecting to a printer, we recommend using the AC adaptor as the power source. • Disconnect the USB connection cable and DC cable after printing. • Use the supplied USB connection cable only. 99