Panasonic EW3152W Instruction Manual - Page 20
Press, shown., shown, press
View all Panasonic EW3152W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
RECALLING STORED MEASUREMENT VALUES M/R O 1O 2O Press the M/R (memory/recall) button for the person whose data you want to recall. SYS. reirdig 2e0o°0 0 DIA. 90 a SO 0 Pulse /min. M/R O C=, 1O 2O M/R CDi 1O 20 nosHg DIA. rmSig ea° so°0 Se SO 0 0 Pulse /min. M/R IC= (=, 1O 2O ) On/Off The average of all measured values in memory will be shown. • 03 mark will be shown at the bottom of the display. • For example, if 90 measured values are stored, the average of the 90 measurements will be shown. (If only 1 measurement is stored, the . mark will not be shown.) • The blood pressure indicator lamps will light (for approximately 6 seconds). 2 Press the M/R (memory/recall) button again. Each time you press the M/R (memory/recall) button, the previously stored measurement values shown will be in order, starting with the newest data. • The blood pressure indicator lamps will light (for approximately 6 seconds). • If no measurement values are stored, no value will be shown. Press the M/R (memory/recall) button lightly for only a short time. If you hold the button pressed for approximately 3 seconds or longer, all data in memory will be erased, so please be careful. 3press cancel measurement value recall, the On/Off Start button. • If you forget to switch it off, the blood pressure monitor will switch off automatically after approximately 30 seconds. 20