Panasonic KX-TA624-5 Analog Pbx - Page 27
LED Indication, Flashing light patterns, LED Indication on the INTERCOM Button, BLF on DSS Button
UPC - 037988850648
View all Panasonic KX-TA624-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
1.1 Configuration LED Indication The Light Emitting Diode (LED) buttons indicate the line conditions with lighting patterns. Flashing light patterns Flashing slowly (60 flash/min) Flashing moderately (120 flash/min) Flashing rapidly (240 flash/min) 1 s LED Indication on the INTERCOM Button The table below shows the lighting patterns for intercom line conditions. INTERCOM button Intercom Line Condition Off Green On Flashing Green Slowly Flashing Green Moderately Flashing Green Rapidly Idle Intercom call / Conference established Intercom call hold Intercom call exclusive hold Incoming intercom/doorphone call LED Indication on the CO Button The table below shows the lighting patterns for outside (CO) line conditions. CO Button Outside (CO) Line Condition Off Green On Flashing Green Slowly Flashing Green Moderately Flashing Red Rapidly Red On Flashing Red Slowly Idle You are using the line. You have a held call or Hold Recall You have one of the following: (1) exclusive hold, (2) outside-to-outside (CO-toCO) line call, or (3) Conference, Unattended. Incoming call Other-use Other-hold* - Item with an * is only available on a Single-CO button. BLF on DSS Button The Busy Lamp Field (BLF) indicator button is red when the corresponding extension is busy. This is available for flexible CO buttons assigned as DSS buttons on proprietary telephones and DSS buttons on DSS Consoles. PT Overview 1-15