Panasonic KX-TA624-5 Analog Pbx - Page 44
One-Touch Dialing Button, Conditions
UPC - 037988850648
View all Panasonic KX-TA624-5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2.2 Station Programming (Personal Programming) One-Touch Dialing Button (Assignment) Allows you to assign a Flexible button (CO, DSS, MESSAGE, PF) as a One-Touch Dialing button. - Be sure that you are in the Station Programming mode. Set the MEMORY switch to "PROGRAM". PT ( )CO No. +2 MESSAGE PF desired number AUTO DIAL STORE Press the desired Flexible button you wish to assign as a One-Touch Dialing button and dial 2, or press the desired PF button. Not Stored Enter the desired number (extension number, phone number, etc.). Press STORE. • The STORE indicator lights. • The display shows the initial programming mode. • Up to 24 digits can be stored. • To erase an incorrect entry, press the TRANSFER (CLEAR) button. (The TRANSFER button becomes the CLEAR button during programming.) - To exit the Station Programming mode, set the MEMORY switch to "SET" Conditions • The number can be an extension number, telephone number or feature number. Up to twenty-four digits can be stored in a One-Touch Dialing button. • To store the telephone number of an external party, a line access code (9 or 81 through 86) must be stored as the first digit. • You can store a number consisting of twenty-five digits or more by dividing and assigning it into two One-Touch Dialing buttons. In this case, the line access code should be stored in the first button. • To store an account code, press and then enter the desired code. The account codes must be stored after the line access code. • You can use 0 through 9, , #, PAUSE and INTERCOM for storing. #: change the dialing mode (Pulse to Tone) PAUSE: pause INTERCOM: secret 2-16 Station Programming (Personal Programming)