Panasonic KX-TG2248S 2.4 Ghz Digital Cdl - Page 12

Programmable Functions Date and Time Handset " " flashes on the base unit display if the clock has not been set. Set the clock by following the steps below. > > > > > > 1 Press [MENU]. 2 Scroll to "Date and time" by pressing [ ] or [ ], then press Select. Date and time Exit Select 3 1 Enter 2 digits each for month, day, and year. (Ex. To set Apr. 7, 2003, enter "04 07 03".) 2 Enter 4 digits for time (hour and minute). (Ex. To set 9:30, enter "0930".) • If you enter a wrong number, press [ ] or [ ] to move the cursor to the incorrect number. Enter the correct number. 4 Select "AM" or "PM" by pressing AM/PM. Date:12.31.2003 Time:12:00 AM AM/PM Save Example Date:04.07.2003 Time:09:30 AM AM/PM Save Date:04.07.2003 Time:09:30 AM AM/PM Save 5 Press Save, then press [OFF]. • The clock is set and " " disappears from the base unit. • If 3 beeps sound after pressing Save, the setting is not correct. Start again from step 3. • When entering the time in step 3, you cannot enter numbers greater than 12. Do not use military time. (To set 13:00 hours, enter "0100", then select "PM" in step 4.) If a power failure occurs, the time setting may be incorrect. When " " flashes on the base unit display, adjust the date/time. To check the date/time, repeat steps 1 and 2 above. • The current date/time is displayed. When finished, press [OFF]. For Caller ID service users (p. 25) • Caller ID information will reset the clock after the first ring if the adjusted time is incorrect. • If the time has not previously been set, Caller ID information will not adjust the clock. • Caller ID information will automatically adjust the clock for daylight saving time. 12