Panasonic KX-TG2248S 2.4 Ghz Digital Cdl - Page 23

Making Calls Cordless Telephone > > To dial after confirming the To redial using the redial entered number list (Memory Redial) 1 Enter a phone number. The last 5 phone numbers dialed with the handset are stored in the redial list. 3334444 Clear Pause • If you misdial, press Clear. Enter the correct number. • If a pause is required for dialing, press Pause where needed (p. 38). • To cancel, press [OFF]. 2 Press [ ] or [ ]. 3 To hang up, press [OFF] or place the handset on the base unit. 1 Press [REDIAL]. 333-4444 Exit Erase > > • The last number dialed is displayed. 2 Scroll to the desired number by pressing [ ] or [ ]. • You can also scroll through the list by pressing [REDIAL]. • To exit the list, press [OFF] or Exit. 3 Press [ ] or [ ]. If noise interferes with the conversation Have the unit select a clearer channel by doing one of the following: Press [ ] (Channel) if talking using [ ], press [ ] (Channel) if talking using [ ], or press CH, which is displayed when you adjust receiver or speaker volume (p. 24). OR Walk closer to the base unit. • To erase an item, scroll to the desired item then press Erase. • If "No items stored" is displayed, the list is empty. To put a call on hold Press Hold during a conversation. Talk 00-00-08 (VE) Hold • "Hold" is displayed. • To page the base unit while holding, press Intercom (Intercom hold). To return to the call, press [ ] or [ ]. To redial the last number dialed • If another phone is connected on the same line, you can also return to the call by lifting its handset. Press [ ] or [ ], then press [REDIAL]. • If a call is kept holding for 6 minutes, an alarm tone will start to sound. After 4 additional minutes on hold, the call will be disconnected. • The alarm volume corresponds to the ringer volume level (p. 17). If the ringer is OFF, the alarm will sound at the LOW level. For assistance, please call: 1-800-211-PANA(7262) 23