Panasonic KX-TG9344T Expandable Digital Cordless Ans Sys - Page 30

Programming the first handset makes the announcement, while the other handsets only sound the tone. L If the other unit is in use at the set time, the handsets sound the tone instead of the selected announcement. L If you select "Once", the setting changes to "Off" after the alarm sounds. L When the ringer volume for outside calls is set to off (page 26), the alarm sound is heard at a low level. Customer support The handset can display the Internet address where you can download the operating instructions or get further information for this product by using your computer. 1 {MENU} i {#}{6}{8}{0} 2 {OFF} 1 Handset: {MENU} i {#}{1}{3}{0} 2 Base unit: Press and hold {LOCATOR} for 4 seconds until the registration tone sounds. L If all registered handsets start ringing, press the same button to stop. Then repeat this step. L The next step should be completed within 90 seconds. 3 Handset: Press {OK}, then wait until a long beep sounds. 4 {OFF} Note: L While registering, "Base registering" is displayed on all registered handsets. L When you purchase an additional handset, refer to the additional handset's installation manual for registration. Registering a unit Operating additional handsets Additional handsets Up to 6 handsets can be registered to the base unit. Important: L See page 6 for information on the available model. Deregistering a handset A handset can cancel its own registration (or the registration of another handset) that is stored in the base unit. This allows the handset to end its wireless connection with the system. 1 {MENU} i {#}{1}{3}{1} 2 {3}{3}{5} i {OK} 3 Select the handset you want to cancel by pressing the desired handset number. Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, register the handset. 30 For assistance, please visit http://www.panasonic.com/help