Panasonic KX-TG9344T Expandable Digital Cordless Ans Sys - Page 46

Useful Information Error messages If the unit detects a problem, one of the following messages is shown on the display. Display message Busy or System is busy. Please try again later. Check tel line Don't use this battery. Error!! Insert battery Invalid No link to base. Reconnect AC adaptor. Phonebook full Store VM access# Cause/solution L The called handset or base unit is in use. L Other units are in use and the system is busy. Try again later. L The handset you are using is too far from the base unit. Move closer and try again. L The handset's registration may have been canceled. Re-register the handset (page 30). L The supplied telephone line cord has not been connected yet or not connected properly. Check the connections (page 12). L A wrong type of batteries such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH batteries noted on page 6, 13. L The handset's registration has failed. Move the handset and base unit away from all electrical appliances and try again. L The handset was placed on the base unit or charger without batteries. Insert the batteries properly (page 13). L There is no handset registered to the base unit matching the handset number you entered. L The handset is not registered to the base unit. Register the handset (page 30). L The handset has lost communication with the base unit. Move closer to the base unit and try again. L Unplug the base unit's AC adaptor to reset the unit. Reconnect the adaptor and try again. L The handset's registration may have been canceled. Re-register the handset (page 30). L The phonebook memory is full. Erase unnecessary entries (page 22). L You have not stored the voice mail access number. Store the number (page 40). 46 For assistance, please visit http://www.panasonic.com/help