Panasonic KXTG5471 5.8ghz Telephone - Page 11

Installation Connections Raise the antennas. Preparation Telephone System Answering System Useful Information Single-Line Telephone Jack (RJ11C) *Noise Filter (For DSL users) Fasten the AC adaptor cord. Hook Telephone Line Cord Power Outlet (AC 120 V, 60 Hz) Bottom of the base unit AC Adaptor • USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z). • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) • The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. • If your unit is connected to a PBX which does not support Caller ID, you cannot access Caller ID services. • This unit will not function during a power failure. We recommend connecting a standard telephone to the same telephone line or to the same telephone jack using the Panasonic KX-J66 T-adaptor. Emergency power can be supplied to the unit by connecting the Panasonic battery back-up power supply KX-TCA200. * If the unit is connected to a telephone line with DSL service, you may hear noise from the receiver or speaker during conversations or the unit may not display caller's name and/or phone number properly. We recommend connecting a noise filter (contact your DSL service provider) to the telephone line between the base unit and the telephone line jack. For assistance, please call: 1-800-211-PANA(7262) 11