Panasonic MCV3110 MCV3110 User Guide - Page 22

Using Tools

Page 22 highlights

Using Tools CAUTION Crevice Tool Suceur plat Herramienta para hendiduras Telescopic Wand Rallonge télescopique Tubo telescópico Dusting Brush Brosse à épousseter Cepillo para sacudir Upholstery Tool Suceur pour capitonnage Herramienta para tapices If tools are used, and vacuum is left in upright position, carpet damage could occur. Agitator rotates when using tools, use care to ensure that nothing comes into contact with agitator. Hose Tuyau Manguera Agitator (Underneath) Agitateur (dessous) Agitador (Abajo) ➢ Remove lower end of stretch hose from the back of the nozzle by twisting and pulling straight out. ➢ The tools can be attached to hose, wand or crevice tool. ➢ Remove telescopic wand from vacuum. ➢ Remove crevice tool from telescopic wand. ➢ To extend wand, turn locking ring to UNLOCK position and pull out to full length. ➢ Turn locking ring to LOCK position. ➢ DO NOT overextend your reach with hose as it could tip vacuum. ➢ Place all tools and hose back in the same manner as shown in TOOL STORAGE. - 22 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

- 22 -
Using Tools
CAUTION
If tools are used, and vacuum is left in
upright position, carpet damage could
occur.
Agitator rotates when using tools, use
care to ensure that nothing comes into
contact with agitator.
Telescopic
Wand
Rallonge
t
é
lescopique
Tubo telesc
ó
pico
Dusting Brush
Brosse
à
é
pousseter
Cepillo para
sacudir
Upholstery Tool
Suceur pour
capitonnage
Herramienta
para tapices
Crevice Tool
Suceur plat
Herramienta
para hendiduras
Agitator (Underneath)
Agitateur (dessous)
Agitador (Abajo)
Hose
Tuyau
Manguera
Remove lower end of stretch hose from
the back of the nozzle by twisting and
pulling straight out.
The tools can be attached to hose,
wand or crevice tool.
Remove telescopic wand from vacuum.
Remove crevice tool from telescopic
wand.
To extend wand, turn locking ring to
UNLOCK position and pull out to full
length.
Turn locking ring to LOCK position.
DO NOT overextend your reach with
hose as it could tip vacuum.
Place all tools and hose back in the
same manner as shown in TOOL
STORAGE.