Panasonic PT-FW300U Lcd Projector - Page 43

Test Pattern, Initialize All, Filter Counter Reset, English - 43

Get Panasonic PT-FW300U - LCD Proj Wxga 600:1 3500 Lumens Enet 13.7LBS H/v Lens PDF manuals and user guides
UPC - 791871111826
View all Panasonic PT-FW300U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Q COMPUTER2 COM.AUDIO IN 2 Output audio that is input to the COMPUTER AUDIO 2. AUDIO IN Output audio that is input to the AUDIO IN. TEST PATTERN You can use the 7 different test patterns to adjust the focus of the image. See "Lens shift and positioning" on page 17. 1. Press the ENTER button to display the test pattern 1. 2. Press I H to select the required test pattern. 3. Adjust the focus with the focus lever. 4. Press the MENU or RETURN button to return to the previous menu, or press repeatedly to escape from the menu mode. PROJECTOR SETUP menu FILTER COUNTER RESET After you replaced the Auto Cleaning Filter (ACF), REMAINING FILTER of STATUS in PROJECTOR SETUP need to be reset to "0". 1. Press the ENTER button for more than 3 seconds. The confirmation screen will be displayed. 2. Select OK by pressing I, then press the ENTER button. 3. Display the STATUS and confirm the figure. NOTE: • When the projector and/or the screen is tilted, adjust the focus at the center of the image. The upper and lower edge might be out of focus. • When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu. INITIALIZE ALL You can reset all of the customized settings to the factory defaults except NETWORK, RUNTIME and REMAINING FILTER of STATUS in PROJECTOR SETUP menu. 1. Press the ENTER button. 2. Select OK by pressing I, then press the ENTER button. 3. Turn off the power by pressing the power button. 4. Switch off the MAIN POWER button to reset the projector. 5. Switch on the MAIN POWER button. 6. Press the power button. 7. The minimum required setting screen will be displayed. See "Minimum required setting screen" on page 11. NOTE: • The security system is deactivated by default and when initialized. • When the projector is initialized, it will be reset to the factory default password operation. Settings ENGLISH - 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
PROJECTOR SETUP menu
E
NGLISH - 43
Settings
COMPUTER2
COM.AUDIO IN 2
Output audio that is input to the
COMPUTER AUDIO 2
.
AUDIO IN
Output audio that is input to the
AUDIO IN
.
You can use the 7 different test patterns to adjust the
focus of the image. See “Lens shift and positioning” on
page 17.
1.
Press the
ENTER
button to display the test pattern
1.
2. Press
I
H
to select the required test pattern.
3.
Adjust the focus with the focus lever.
4.
Press the
MENU
or
RETURN
button to return to
the previous menu, or press repeatedly to escape
from the menu mode.
You can reset all of the customized settings to the factory
defaults except
NETWORK
,
RUNTIME
and
REMAINING FILTER
of
STATUS
in
PROJECTOR
SETUP
menu.
1.
Press the
ENTER
button.
2. Select
OK
by pressing
I
, then press the
ENTER
button.
3.
Turn off the power by pressing the power button.
4.
Switch off the
MAIN POWER
button to reset the
projector.
5.
Switch on the
MAIN POWER
button.
6.
Press the power button.
7.
The minimum required setting screen will be
displayed.
See “Minimum required setting screen” on page 11.
After you replaced the Auto Cleaning Filter (ACF),
REMAINING FILTER
of
STATUS
in
PROJECTOR
SETUP
need to be reset to "0".
1.
Press the
ENTER
button for more than 3 seconds.
The confirmation screen will be displayed.
2. Select
OK
by pressing
I
, then press the
ENTER
button.
3.
Display the
STATUS
and confirm the figure.
TEST PATTERN
NOTE:
•
When the projector and/or the screen is tilted, adjust
the focus at the center of the image. The upper and
lower edge might be out of focus.
•
When the image is distorted in keystone, adjust the
KEYSTONE
in
POSITION
menu.
INITIALIZE ALL
NOTE:
•
The security system is deactivated by default and when
initialized.
•
When the projector is initialized, it will be reset to the
factory default password operation.
FILTER COUNTER RESET