Panasonic PT-FW300U Lcd Projector - Page 54
Computer connection guidance, Technical Information, Cable specifications, Control commands
UPC - 791871111826
View all Panasonic PT-FW300U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Technical Information J Cable specifications (When connected to a personal computer) NC NC NC Projector NC NC PC (DTE) NC NC NC J Control commands Command PON POF AVL IIS Q$S OSH Control contents Power ON Power OFF Volume INPUT Lamp condition query AV MUTE Remarks In standby mode, all commands other than the PON command are ignored. The PON command is ignored during lamp ON control. If a PON command is received while the cooling fan is operating after the lamp has switched off, the lamp is not turned back on again straight away in order to protect the lamp. Parameter 000 - 063 (Adjustment value 0 - 63) Parameter: VID = VIDEO RG1 = COMPUTER1 DVI = DVI SVD = S-VIDEO RG2 = COMPUTER2 NWP = NETWORK Call back 0 = Standby 1 = Lamp ON control active 2 = Lamp ON 3 = Lamp OFF control active Turning off the projection and sound temporarily. Send the command to switch between ON and OFF. Do not send the command consecutively. Computer connection guidance You can switch the signals which to output from the COMPUTER1 OUT terminal by pressing the computer key command. The key commands are depend on the manufactures. If you select the computer terminals which has no signals while the INPUT GUIDE is set to DETAILED, the computer connection guidance will be displayed. Manufacturer Panasonic NEC Key command Manufacturer TOSHIBA + SHARP HP Key command + Manufacturer IBM SONY Apple Key command + FUJITSU EPSON + DELL + Others + NOTE: • The computer connection guidance will disappear after 5 minutes. • Please refer the instructions which provided with the computers for more detailed information. Appendix ENGLISH - 54