Panasonic PT-FW300U Lcd Projector - Page 45

SECURITY menu

E

NGLISH - 45

Settings

You can lock the

MENU

button function and the

password will be asked to display the menu every time.

OFF

Deactivate the

MENU LOCK

system.

ON

Activate the

MENU LOCK

system.

You can change the password for

MENU LOCK

system

to your original.

1.

Press the

ENTER

button.

2.

Enter the original password.

Use

F

G

I

H

to specify the location of the required

character, and press the

ENTER

button.

3.

Repeat step 2 until you finish the text line.

You can enter up to 16 characters.

Move the cursor to

ALL DELETE

and press the

ENTER

button to delete all the entered text line.

Press the

DEFAULT

button to delete the last entered

character or indicated with the cursor in the text line.

To insert a character in the entered text line, move

the cursor to the text box to select the required place

and press

G

then perform step 2.

4. Select

OK

and press the

ENTER

button to set the

password.

CONTROL PANEL

You can disable the control panel buttons on the

projector body. Press

I

or

H

to switch the option.

ENABLE

Enable the control panel buttons.

DISABLE

Disable the control panel buttons.

The confirmation screen will be

displayed. Select

OK

by pressing the

I

, and the

ENTER

button.

REMOTE CONTROLLER

You can disable the remote control buttons. Press

I

or

H

to switch the option.

ENABLE

Enable the remote control buttons.

DISABLE

Disable the remote control buttons.

The confirmation screen will be

displayed. Select

OK

by pressing the

I

, and the

ENTER

button.

MENU LOCK

NOTE:

•

The factory default password is “AAAA”.

•

The factory default password is valid until you change

the password in

MENU LOCK PASSWORD

menu.

•

When the projector is initialized, the

MENU LOCK

will

be deactivated.

MENU LOCK PASSWORD

OK

CANCEL

ALL DELETE

MENU LOCK PASSWORD

SPACE

CONTROL DEVICE SETUP

NOTE:

•

If you disable both of the control panel and remote

control buttons, you cannot return to the standby mode.

Use this function with utmost care.

•

If you press a disabled button, you will be asked to

perform the security password operation. The

password screen will disappear after 10 seconds

without any operation.

NOTE:

•

You can enable the disabled control panel buttons by

performing the control panel button operation. While

pressing the

ENTER

button, press the

MENU

button for

2 seconds.

Section	Page
Important Safety Notice	2
Contents	4
Precautions with regard to safety	6
WARNINGS	6
CAUTIONS	7
Cautions when transporting	8
Cautions when installing	8
Cautions on use	9
Security	9
Accessories	10
Read this first	11
Minimum required setting screen	11
About Your Projector	12
Projector body	12
Remote control	14
Setting up	15
Screen size and throw distance	15
Projection method	16
Front leg adjusters and throwing angle	16
Lens shift and positioning	17
Connections	19
Before connection to the projector	19
Connecting example: Computers	19
Connecting example: AV equipment	20
Switching the projector on/off	21
Power cord	21
Power indicator	22
Switching on the projector	23
Switching off the projector	23
Projecting an image	24
Selecting the input signal	24
Positioning the image	24
Remote control operation	25
Operating range	25
Setting up the image position automatically	25
Switching the input signal	26
Enlarging the centered area	26
Capturing an image	27
Stopping the projection	27
Resetting to the factory default settings	27
Projecting an image in INDEX-WINDOW mode	27
Using an assigned function	28
Projecting 2 different source image at a time	28
Using the laser pointer	29
Controlling the volume of the speaker	29
Menu Navigation	30
Main menu and Sub-menu	30
Navigating through the menu	32
PICTURE menu	33
PICTURE MODE	33
CONTRAST	33
BRIGHTNESS	33
COLOR	33
TINT	33
SHARPNESS	33
WHITE BALANCE RED	33
WHITE BALANCE GREEN	33
WHITE BALANCE BLUE	33
COLOR TEMPERATURE	34
DAYLIGHT VIEW	34
DIGITAL CINEMA REALITY	34
NOISE REDUCTION	34
TV-SYSTEM	34
RGB/YPBPR	34
POSITION menu	35
KEYSTONE	35
SHIFT	35
SHIFT V	35
DOT CLOCK	35
CLOCK PHASE	35
OVER SCAN	35
ASPECT	36
FRAME LOCK	37
DISPLAY OPTION menu	38
ON-SCREEN DISPLAY	38
DVI-D IN	38
CLOSED CAPTION SETTING	38
SCREEN SETTING	38
STARTUP LOGO	39
AUTO SETUP	39
SIGNAL SEARCH	39
BACK COLOR	39
WIDE MODE	39
SXGA MODE	39
OTHER FUNCTIONS	40
PROJECTOR SETUP menu	41
STATUS	41
COMPUTER2 SELECT	41
NO SIGNAL SHUT-OFF	41
INITIAL START UP	41
INSTALLATION	42
HIGH ALTITUDE MODE	42
EMULATE	42
FUNCTION BUTTON	42
AUDIO SETTING	42
TEST PATTERN	43
INITIALIZE ALL	43
FILTER COUNTER RESET	43
SECURITY menu	44
PASSWORD	44
PASSWORD CHANGE	44
TEXT DISPLAY	44
TEXT CHANGE	44
MENU LOCK	45
MENU LOCK PASSWORD	45
CONTROL DEVICE SETUP	45
NETWORK menu	46
Items in NETWORK menu	46
TEMP, LAMP and FILTER Indicators	47
Managing the indicated problems	47
Care and Replacement	48
Cleaning the projector	48
Replacing the Lamp unit	48
Replacing the Auto Cleaning Filter (ACF)	49
Troubleshooting	51
Technical Information	52
List of compatible signals	52
Serial terminal	53
Computer connection guidance	54
REMOTE terminal	55
DVI-D IN terminal	56
Ceiling mount bracket safeguards	56
Screen size and throw distance for 16:9 aspect ratio	57
Screen size and throw distance for 4:3 aspect ratio	57
Specifications	58
Dimensions	60
Trademark acknowledgements	60
Index	61
A	61
B	61
C	61
D	61
E	61
F	61
H	61
I	61
K	61
L	61
M	61
N	62
O	62
P	62
R	62
S	62
T	62
V	62
W	62
Z	62
Avis important concernant la sécurité	63
Précautions de sécurité	65
AVERTISSEMENT	65
MISES EN GARDE	66
Précautions lors du transport	67
Précautions lors de l'installation	67
Précautions lors de l'utilisation	67
Sécurité	68
Remplacement de l'unité de la lampe	69

Panasonic PT-FW300U Lcd Projector - Page 45

Menu Lock, Menu Lock Password, Control Device Setup, Security Menu, Control Panel, Remote Controller

Page 45 highlights