Panasonic PV GS15 Digital Video Camcorder - Page 15
POWER SUPPLY, Using the Remote Control, PV-GS15 Only, Using the, AC Adaptor, Using the Battery - reset
UPC - 037988977734
View all Panasonic PV GS15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Before Use • When the button-type battery is exhausted, replace it with a new CR2025 battery. (A battery is normally expected to last about 1 year. However, it depends on operation frequency.) • Make sure to match the poles correctly when inserting the button-type battery. WARNING ●Replace Battery with Panasonic or Lixing type CR2025 only. Use of another battery may present a risk of fire or explosion. ●Battery may explode if mistreated. ●As with any small object, this type of Battery can be swallowed by young children. Do not allow children to handle this Battery. CAUTION ●Dispose of used battery promptly. ●Do not recharge, disassemble or dispose of in fire. Setup on the Remote Control: 2 1 [VCR1]: Press the [ ] Button and [ ] Button simultaneously. 1 [VCR2]: Press the [ ] Button and [ ] Button simultaneously. 2 • When the battery in the Remote Control is replaced, the mode is automatically reset to [VCR1] Mode. Power Supply Using the AC Adaptor Using the Remote Control (PV-GS15 Only) 1 Direct the Remote Control at the Remote Control Sensor 31 of the Camcorder and press an appropriate button. 15° 15° 31 15° 15° • Distance from the Camcorder: Within approximately 15 feet (5 meters) • Angle: Within approximately 15° in the vertical and horizontal directions from the central axis • The above operating ranges are for indoor use Outdoors or under strong light, the Camcorder may not operate properly even within the above ranges. Selecting Remote Control Modes When 2 Camcorders are used simultaneously, they can be operated individually by selecting different Remote Control Modes. • If the Remote Control Mode of the Camcorder and that of the Remote Control do not match, [CHECK REMOTE MODE (REMOTE)] Indication is displayed. Setup on the Camcorder: Set [REMOTE] on the [INITIAL] Sub-Menu to the desired Remote Control Mode. (p. 21) 1 Connect the DC Cable to the Camcorder. 2 Connect the DC Cable to the AC Adaptor. 3 Connect the AC Cable to the AC Adaptor and the AC Jack. • Before connecting or disconnecting the power supply, set the [OFF/ON] Switch 44 on the Camcorder to [OFF] and make sure that [POWER] Lamp is not lit. (p. 18) Using the Battery Before use, fully charge the Battery. • We recommend using a Panasonic Battery. • We cannot guarantee the quality of this Camcorder when batteries from other companies are used. 1 Attach the Battery to the AC Adaptor and charge it. 15