Panasonic PV GS15 Digital Video Camcorder - Page 17

Before Use Re-attaching the Lens Cap To protect the Lens surface, attach the Lens Cap. • The Lens Cap and Lens Cap Cord come preattached to the Grip Belt. • Pull it out more than 1 inch (2 cm) 1 from the Shoulder Strap Length Adjuster so that it cannot slip off. 1 1 Pass one end of the Lens Cap Cord through the attached eye on the Lens Cap. Then pass the Lens Cap through the loop made by itself and pull tight. • Attach the other end of the Shoulder Strap to the other Shoulder Strap Holder in the same way. Inserting a Cassette 1 Slide the [OPEN/EJECT] Lever 37 toward the front and pull down to fully open the Cassette Compartment Cover. • To protect the tape, if the cover is not fully opened, the cassette cannot be ejected. 37 • When not using the Lens Cap, pull the Lens Cap Cord in the direction of the arrow. 1 • When you are not recording, be sure to cover the Lens with the Lens Cap for protection. 2 2 Insert a Cassette. 2 3 Close the Cassette Holder by pressing the 1 [PUSH] mark 1 . • When you remove the Lens Cap, press the knobs firmly. 1 4 Close the Cassette Compartment Cover by pressing the mark 2 . Attaching the Shoulder Strap We recommend that you attach the Shoulder Strap before going out to avoid dropping the Camcorder. 1 Pull the end of the Shoulder Strap through the Shoulder Strap Holder on the Camcorder. 2 Fold the end of the Shoulder Strap, run it through the Shoulder Strap Length Adjuster, and pull it. 2 Accidental Erasure Prevention Opening the accidental erasure prevention slider 1 on the cassette (by sliding it to the [SAVE] arrow direction) prevents recording. To enable recording, close the accidental erasure prevention slider (by sliding it to the [REC] arrow direction). 1 • For other notes concerning this item, see page 61. 17