Panasonic PV GS15 Digital Video Camcorder - Page 48

With a PC 5 Finish installation by following the on-screen instructions. • Click [Next] and proceed with installation. • After completing the installation, Click [Finish]. 6 After the USB Driver is installed, please restart your computer. • Reboot the computer to finish installing USB driver. • Installation continues after the computer reboots if you selected additional software. • A message indicating a conflict between versions may be displayed during the installation. This will not cause a problem. Simply click [Yes] to proceed with the installation. • Depending on the OS version, illustrations and icon names may vary. Windows 98SE/Me Users The following messages may be displayed when connecting this Camcorder and your personal computer via USB Cable. 1 For Windows 98SE Users: The message, "Please insert the disk labeled 'Windows 98 Second Edition CD-ROM',....." is displayed. Click [OK]. Connecting the Personal Computer and Camcorder Please install the USB Driver first before connecting the Camcorder to your Personal Computer with the USB Cable. Before making these connections, turn off all devices which are to be connected. • When using the USB Connection Kit, use of the AC Adaptor is recommended for the power supply of the Camcorder. For Using Built-in SD Drive (For PV-GS12/PV-GS14/PV-GS15) By connecting the Camcorder and Personal Computer with the USB Cable, you can transfer still images saved on a Memory Card directly to your Personal Computer. (For Windows) 1 Insert the Memory Card into the Camcorder. 2 Set the Camcorder to PC Mode. 1) The message "The file 'kstvtune.ax' on [Unknown] cannot be found..." is displayed. • Enter "C:\Windows\system" for Windows 98SE. Enter "C:\Windows\options\CABS" for Windows Me. • If the "kstvtune.ax" file is missing in one of the 2 above-mentioned folders, insert the OS CD-ROM and assign the path. 2) The message "The file 'ksclockf.ax' on [Unknown] cannot be found..." is displayed. • Enter "C:\Windows\system". • If the "ksclockf.ax" file is missing in the above mentioned folder, insert the OS CD-ROM and assign the path. 3) The message "MTDV98M3.pdr is not found" is displayed. • Enter "C:\Windows\system\IOSUBSYS". 4) The message "MTDV98M3.sys is not found" is displayed. • Enter "C:\Windows\SYSTEM32\DRIVERS". • You may click [Browse] to look for and assign the path. 3 Connect the Camcorder to your personal computer with USB Cable. • It enters PC Connecting Mode. 4 Open [My Computer] and click [Removable Disk] 1 (For Windows 98SE/Me/2000 users). Click [Open folder to view files using Windows Explorer] 2 and then [OK] (For Windows XP users). 48 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo