Panasonic PVGS34PKGP Digital Video Camera - Page 13

Before Using To Use as a Grip Belt Adjust the length of the Grip Belt to the size of your hand. 1 Detach the end of the Grip Belt. 2 Adjust the length of the Grip Belt to the size of your hand. • When you remove the Lens Cap, press the knobs firmly. Attaching the Shoulder Strap We recommend that you attach the Shoulder Strap before going out to avoid dropping the Camcorder. 1 Pull the end of the Shoulder Strap through the Shoulder Strap Holder on the Camcorder. 3 Reattach the Grip Belt. Re-attaching the Lens Cap To protect the Lens surface, attach the Lens Cap. • The Lens Cap and Lens Cap Cord come preattached to the Grip Belt. 2 Fold the end of the Shoulder Strap, run it through the Shoulder Strap Length Adjuster, and pull it. • Pull it out more than 1 inch (2 cm) 1 from the Shoulder Strap Length Adjuster so that it cannot slip off. 1 1 Pass one end of the Lens Cap Cord through the attached eye on the Lens Cap. Then pass the Lens Cap through the loop made by itself and pull tight. • When not using the Lens Cap, pull the Lens Cap Cord in the direction of the arrow. 1 • When you are not recording, be sure to cover the Lens with the Lens Cap for protection. 2 • Attach the other end of the Shoulder Strap to the other Shoulder Strap Holder in the same way. Inserting a Cassette • Please use Genuine Panasonic DVC Tapes for more information please contact your local dealer or visit www.panasonic.com. • For your reference if you travel frequently you should also purchase a Panasonic head cleaning tape AY-DVMCLA and use when HEAD CLOG message appears on the LCD/EVF of your Camcorder. 1 Slide the [OPEN/EJECT] Lever 25 toward the front and pull down to fully open the Cassette Compartment Cover. • To protect the tape, if the cover is not fully opened, the cassette holder cannot be ejected. 25 2 After the Cassette Holder is opened, insert a Cassette. 2 1 13