Panasonic PVGS34PKGP Digital Video Camera - Page 20
Setting Date And Time, Internal Lithium Battery Recharge, Picture Playback Menu], Basic], Advance]
View all Panasonic PVGS34PKGP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Before Using [PICTURE PLAYBACK MENU] e.g., BASIC ADVANCE SETUP LANGUAGE BASIC DATE/TIME D/T PROTECT NO SETUP ENTER EXIT SETUP ENTER EXIT [ BASIC] Basic Setup Sub-Menu [ DATE/TIME] Date and Time Indication (p. 51) [ PROTECT] Setting the Lock (p. 35) [ ADVANCE] Advance Setup Sub-Menu [ DPOF SET] Setting DPOF (p. 35) [ CARD FORMAT] Formatting a Card (p. 36) [ SETUP] Setup Sub-Menu [ DISPLAY] Display Mode (p. 51) [ LCD SET] LCD Adjustment (p. 17) [ EVF SET] Viewfinder Adjustment (p. 17) [ POWER SAVE] Power Save Mode (p. 51) [ LANGUAGE] Language Setup Sub-menu (p. 18) Setting Date and Time Since the internal clock of the Camcorder has a slight imprecision make sure to check the time before recording. 28 2 Move the Joystick Control [◄] or [►] 33 to select the item to be set. Then move the Joystick Control [▲] or [▼] 33 to set the desired value. • Year will cycle in the order shown below. 2000, 2001, ..., 2089, 2000, ... 3 Press the Joystick Control 33 to finish setting the date and time. • The clock operation starts from [00] second. • If the built-in battery is weak, the [ ] Indication flashes. In this case, charge the built-in battery. • The clock uses the 12-hour system. About date/time • The Date and Time function are driven by a built-in lithium battery. • Make sure to check the time before recording because the built-in clock is not very accurate. Internal Lithium Battery Recharge The internal lithium battery sustains the operation of the clock. If the [ ] or [--] is indicated when the Camcorder is turned on, the internal lithium battery is near exhaustion. 1 Connect the AC Adaptor to the Camcorder with the power turned off and then connect to the AC jack. 32 33 • Set to Tape/Card Recording Mode. 1 Set [ BASIC] >> [ CLOCK SET] >> [YES]. CLOCK SET JAN /01/2005 12AM:00 SETUP SET ENTER EXIT • After charging for 4 hours, the built-in lithium battery can power the clock for approximately 3 months. • Leave the Camcorder as is for approx. 24 hours, and the battery will drive the Date and Time for approx. 6 months. (Even if the [OFF/ON] Switch is set to [OFF], the battery is still being recharged.) 20 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo