Panasonic SA-C100 Operating Instructions - Page 100
Remote control, Messages
View all Panasonic SA-C100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Remote control The remote control does not work properly. ••The batteries are depleted or inserted incorrectly. (⇒ 19) ••To avoid interference, please do not put any objects in front of signal sensor. (⇒ 14) ••If the remote control mode of the remote control differs from that of this unit, match the mode of the remote control to the mode of this unit. (⇒ 19) Messages Adjust CLOCK ••Set the clock before setting the timer. (⇒ 82) Adjust Play Timer ••Set the starting time and finishing time of the timer. (⇒ 83) Auto Off ••The unit has been left unused for about 20 minutes and will shut down within a minute. Press any button to cancel it. Checking Device ••The unit is checking the connected USB device. After this display has disappeared, start operating. Connect to Network ••Connect this unit to the network and then wait for the start of the Firmware Update via Internet. (⇒ 89) Connect USB Device ••Download the latest firmware on the USB flash memory and try again. (⇒ 90) Download Fail ••The firmware download has failed. Press any button to exit. Please try again later. ••The server cannot be found. Press any button to exit. Make sure that the network is connected to the internet. Empty ••The selected folder is empty. Move tracks into the folder and retry the operation. ••The server is not found on the network. Check to see if the server is connected to the same network as this unit, and retry the connection to this unit. (⇒ 26) ••No Internet Radio station is registered to the favorite list. Add a station to the list. (⇒ 59) ••No station or playlist is registered to [FAV]. Add an item to the list. (⇒ 79) Error ••Incorrect operation is performed. Read the instructions and try again. 100 (Continued)