Panasonic SA-C100 Operating Instructions - Page 89
Firmware updates, F/W Update
View all Panasonic SA-C100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Firmware updates "F/W Update" Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge. ••For the update information, refer to the following website. www.technics.com/support/firmware/ Downloading takes approx. 15 minutes. Do not disconnect the AC power supply cord or turn this unit to standby while updating. Do not disconnect the USB flash memory while updating. ••The progress is displayed as "Updating %" while updating. (" " stands for a number.) Note ••Due to measure to solve security issues, etc., there are times when operations (timers, etc.) on this system are forcibly stopped and the firmware is updated. If you do not want the firmware forcibly updated, disconnect the LAN cable or disconnect from the wireless network. ••During the update process, no other operations can be performed. ••If there are no updates, "Firmware is Up To Date" is displayed. (No need to update it.) ••Updating the firmware may reset the settings of this unit. Update via Internet ■■Preparation ••Connect this unit to the network. (⇒ 26) Make sure that the network is connected to the Internet. 1 Press [SETUP]. 2 Press [ ], [ ] repeatedly to select "F/W Update" and then press [OK]. 3 Press [ ], [ ] to select "Internet" and then press [OK]. 4 Press [ ], [ ] to select "Yes" and then press [OK]. ••The progress is displayed as "Updating %" while updating. (" " stands for a number.) ••When the update has finished successfully, "Success" is displayed. 5 Press [ ] to turn this unit off and on. 89 (Continued)