Panasonic SA-C100 Operating Instructions - Page 102
USB Over Current
View all Panasonic SA-C100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Not Valid ••The function you have tried to use is not available with the current settings. Check the steps and settings. Operate via App ••Operation from the unit or remote control is not available. ••Use the connected device or application for operating. PGM Full ••The number of programed tracks is more than 24. Please Wait ••This is displayed, for example, when this unit is turned to standby/on. (For up to approx. 1 minute and 30 seconds) Reading ••The unit is checking the CD information. After this display has disappeared, start operating. "Remote " (" " stands for a number.) ••The remote control and this unit are using different modes. Change the mode on the remote control. (⇒ 19) Searching ••The unit is checking the media server on the network. This track is not available. ••Some content may not be available on the music streaming service, etc. Unlocked ••"OPT" or "COAX" is selected, but no device is connected. Check the connection with the device. (⇒ 49) ••The sampling frequency components, etc. of the audio signals are not input correctly. For supported formats, refer to "File format" (⇒ 111) USB Over Current ••USB device is drawing too much power. Disconnect the USB device and turn the unit to standby and on again. (⇒ 45) Wi-Fi Setup ••Select "Yes" and press [OK] to enter the network setting. (⇒ 29) To exit the network setting, select "No" and press [OK]. 102