Panasonic SA-C100 Operating Instructions - Page 97
Network
View all Panasonic SA-C100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Network Cannot connect to the network. ••Confirm the network connection and settings. (⇒ 26) ••If the network is set to be invisible, make the network visible while you set up the network for this unit or make a wired LAN connection. ••This system's Wi-Fi security supports WPA2™. Your wireless router must therefore be WPA2™ compatible. For details on the security supported by your router and how to change the settings, please refer to the operating instructions or contact your internet service provider. ••Make sure that the multicast function on the wireless router is enabled. ••The wireless LAN environment or radio interference in your area may cause connection problem. In this case, try another connection method. If the problem persists, make a wired LAN connection. (⇒ 28) ••While the AC power supply cord is disconnected, the LAN cable must be connected or disconnected. Cannot select this system as the output speakers. ••Make sure that the devices are connected to the same network as this unit. ••Reconnect the devices to the network. ••Turn the wireless router off and then on. ••Turn this unit to standby and on, and then select this system as the output speakers again. 97 (Continued)