Panasonic SA-C100 Operating Instructions - Page 52
Using PHONO cable, analog audio cable, Switching a phase of record
View all Panasonic SA-C100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Using PHONO cable/ analog audio cable 1 Disconnect the AC power supply cord. 2 Connect this unit and a device. 3 Connect the AC power supply cord to this unit. (⇒ 25) ••Turn the volume down before switching the input source. 4 Press [>SELECT
52
Using PHONO cable/
analog audio cable
1
Disconnect the AC power supply cord.
2
Connect this unit and a device.
3
Connect the AC power supply cord to
this unit.
(
⇒
25)
•
Turn the volume down before switching the
input source.
4
Press [>SELECT<] repeatedly to select
“LINE”/“PHONO”.
5
Start playback on the connected device.
Note
•
When connecting a turntable with a built-in
PHONO equalizer, turn the equalizer of turntable
off or connect the PHONO cable to the analog
audio input terminals (LINE) of this unit.
•
When connecting a turntable with a PHONO
earth lead, connect the PHONO earth lead to the
PHONO EARTH terminal of this unit.
Switching a phase of record to
play
Sets to play back and enjoy the inverted phase
audio.
•
The factory default is “Normal”.
1
Press [MENU].
2
Press [
], [
] repeatedly to select
“Phase” and then press [OK].
3
Press [
], [
] to select “Normal” /
“Invert” and then press [OK].
•
While setting to “Invert”, “INV” is displayed.