Panasonic SA-XR55S SAXR55 User Guide - Page 12

Receiver settings - Basic Change the settings to tailor your equipment to the environment in which you are using it. • Before making any changes, read the following descriptions of the settings and refer to the instructions for the speakers and equipment. Basic operations with the MULTI CONTROL INPUT SELECTOR Turn to change. ENTER Press to enter. Use the MULTI CONTROL menus to change the settings. (áleft "Basic operations with the MULTI CONTROL") 1 MULTI CONTROL Enter the MULTI CONTROL. CANCEL INPUT SELECTOR Select "SETUP 1 " ("BASIC SETUP " scrolls once) SETUP 1 and press [ENTER]. Select the settings to change. (ábelow, page 13) Before use Connections Settings Operations Basic Operations MULTI CONTROL n To return to the previous setting/To cancel Press. CANCEL Turn on. • Any changes to settings remain as set even if the power is turned off. áFor more detailed information on settings refer to "Receiver settings Advanced" on page 21. áPage 24 "Multi control menus and factory settings". Speakers combination settings Set the speaker combination connected to this unit. The speaker combination has to be set in order for the sound to be output properly. 2 Select "SPKR SET " (SPEAKER SET) and press [ENTER]. 3 Select if you have connected a subwoofer or not and press [ENTER]. SUBW NO: You have not connected one. SUBW YES: You have connected one. 4 Select the speaker combination connected to this unit and press [ENTER]. L C R S SB: All speakers connected L _ R S SB: No center speaker L C R S _ _: No surround back speakers L _ R S _ _: No center and surround back speakers L C R _ _ _: No surround and surround back speakers L _ R _ _ _: Only front speakers 5 Select another setting Finish setting Press [MULTI CONTROL, CANCEL] 2 times to select "EXIT " and press [ENTER]. Bi-wiring settings Select this when you connect bi-wire compatible front speakers. (ápage 8) 2 Select "FRNT L/R " (FRONT L/R) and press [ENTER]. 3 Select "BI-WIRE " and press [ENTER]. NORMAL: Normal speakers BI-WIRE: Bi-wire compatible speakers 4 Select another setting Finish setting Press [MULTI CONTROL, CANCEL] 2 times to select "EXIT " and press [ENTER]. Surround back speaker settings This is displayed when you connected surround back speakers in "Speakers combination settings" (áabove). Select this to set the number of surround back speakers. 2 Select "SB SPKR " (SURROUND BACK SPEAKER) and press [ENTER]. 3 Select the number of speakers and press [ENTER]. 1 SPKR: If you connect one surround back speaker. 2 SPKRS: If you connect two surround back speakers. 4 Select another setting Finish setting Press [MULTI CONTROL, CANCEL] 2 times to select "EXIT " and press [ENTER]. Reference RQT7994 12