Panasonic SAHT640 SAHT640 User Guide - Page 27

Adjusting the volume of each speaker: Speaker level adjustments This is one of the ways to get appropriate surround effects. Preparation Press [DVD]. 1 While stopped and no on-screen display is shown Press and hold [-TEST] to output a test signal. ≥ To stop the test signal, press and hold [-TEST] again. L: Front left RS: Right surround C: Center LS: Left surround ≥ There is no output from SW (subwoofer) channel. R: Front right 2 Press [VOLUME, r] or [s] to set the volume level normally used for listening. 3 Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker. ≥ Adjust the speaker levels to the same level as the front speakers. C, RS, LS: `6 dB to i6 dB ∫ To adjust speaker level during play [Effective when playing multi-channel audio or when Dolby Pro Logic II or Sound Field Control (MOVIE, SPORT or MUSIC) is on, and Surround Music is off.] 1 Press [CH SELECT] to select the speaker. L #C #R #RS #LS #SW SW: Subwoofer ≥ You can adjust SW only if the disc includes a subwoofer channel. ≥ "SW" does not appear on the display and is not adjustable when "ÎPLII" is lit. ≥ "S" appears on the display when "MOVIE", "SPORT" or "MUSIC" is selected with Sound Field Control (➜ page 26). In this case, you can adjust both surround speaker levels at the same time using [3, 4]. S: `6 dB to i6 dB 2 Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker. C, RS, LS, SW: `6 dB to i6 dB (L, R: Only the balance is adjustable.) ≥ To adjust the balance of the front speakers, while "L" or "R" is selected, press [2, 1]. Using sound effects RQT8611 27