Panasonic SAHT670 SAHT670 User Guide - Page 23

¡ S1o0uHnBdI field/sou1n0dHqBuIality opera1ti0oHnBIs Sound fields DVD/CD VOLUME - + 89; : MIX 2CH 0PL II SHIFT TEST CH SELECT ¡ Super Surround, Center Focus and Subwoofer Level adjustment (A page 25) cannot be performed if headphones are connected ("ERROR" appears on the display.) ¡ You may experience a reduction in sound quality when these sound field systems are used with some sources. If this occurs, turn the sound field system off. Dolby Digital and DTS ¡ Dolby Digital and DTS are digital encoding systems used on DVD to carry surround sound. Both were originally developed for use in cinemas. ¡ This unit automatically recognizes and decodes these systems. Software encoded with Dolby Digital can be identified with this mark. Software encoded with DTS can be identified with this mark. Play a Dolby Digital or DTS source. The Dolby Digital or DTS indicator lights. L To down-mix Dolby Digital or DTS (multiple-channel) signals to 2 channels Press [SHIFT]+[MIX 2CH]. Dolby Pro Logic II Only when "DVD/CD" is selected as the source Dolby Pro Logic II is an advanced decoder that derives 5 channel surround (Left and Right Front, Center, Left and Right Surround) from any stereo program material, whether or not it has been specifically Dolby Surround encoded. While playing a stereo source Press [pPL II]. Each time you press the button: MOVIE→MUSIC→OFF Movie: Use this mode when playing movie software, especially videotapes, recorded in Dolby Surround. Music: Adds surround effects to stereo sources. OFF: Cancel Note ¡ This does not have any effect when playing multi-channel audio. ¡ This will only have an effect on speakers. ¡ "pPL II" lights when there is a Dolby Pro Logic II effect. Speaker level adjustments Adjust the volume level of the speakers so they are the same apparent level as the front speakers where you would normally be sitting and listening. (L, R A below, "Balance") Preparation Press [DVD/CD]. 1 While stopped Press [SHIFT]+[TEST] for a test signal. L: Front left C: Center R: Front right RS: Right surround LS: Left surround 2 Press [+, -, VOLUME] to set the volume level normally used for listening. 3 Press [8] (to increase) or [9] (to decrease) to adjust speaker level. C, RS, LS: -6 dB to +6 dB To stop the test signal, press [SHIFT]+[TEST] again. L To adjust speaker level (Effective when playing multi-channel audio or Dolby Pro Logic II is on.) 1 Press [CH SELECT] to select the speaker. L→C→R→RS→LS→SW SW: Subwoofer ¡ When Dolby Pro Logic II is turned on, SW does not appear on the display and is not adjustable. 2 Press [8] (to increase) or [9] (to decrease). L, R: (A below) C, RS, LS, SW: -6 dB to +6 dB Balance You can adjust the balance of the front speakers. 1 During play Press [CH SELECT] to select "L" or "R". 2 Press [;, :]. To cancel, press [SHIFT]+[MIX 2CH] again. When "D.MIX" flshes on the display The DVD-Audio contains multiple-channel signals that cannot be downmixed. RQT7534 23