Panasonic SC-AP01 SCAP01 User Guide - Page 12
Others - wireless setting
View all Panasonic SC-AP01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Others Wi-Fi® signal strength To check the Wi-Fi® signal strength where the unit is located. Preparation ≥ Turn the unit on. ≥ Connect this unit to the wireless network. (> 6) 1 If this unit is in use, stop the AirPlay playback to this unit. ≥ Wait for at least 15 seconds before proceeding to step 2. 2 Press and hold both [- VOLUME] and [VOLUME i] on this unit for more than 2 seconds. 3 The operation indicator lights and then blinks a set number of times. Count the number of times the indicator blinks. ≥ A stable connection is available when the operation indicator blinks 3 times. ≥ Change the position or angle of your wireless network router or the unit in the following cases: - The operation indicator only blinks 2 times or 1 time. - The sound is interrupted. Software update Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature operates. These updates are available free of charge. Preparation ≥ Turn the unit on. ≥ Connect this unit to the wireless network. (> 6) jMake sure that the wireless network is connected to the Internet. 1 Press and hold both [- VOLUME] and [- WPS] on this unit for more than 2 seconds. {. The operation indicator (> 4) blinks. DO NOT DISCONNECT the AC adaptor while this unit is updating. ≥ During the update process, no other operations can be performed. ≥ If the update is unsuccessful, the operation indicator will blink in a specific sequence. (> below) {. After the update has finished, the operation indicator (> 4) lights. 2 Disconnect the AC adaptor and reconnect it after 3 minutes. ≥ Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment. ≥ If the update is unsuccessful, the operation indicator will blink in a specific sequence. No. of blinks Problems and solutions The software download has failed. Please try again later. 3 The server cannot be found. Make sure that the wireless network is connected to the Internet. This unit cannot connect to the 2 network. Check the network connection. The update has failed. Turn this unit 1 off and remove the AC adaptor. Reconnect the AC adaptor and try again. 12 RQT9655