Panasonic SVPT1PPS SVPT1 User Guide - Page 50

Warning and Instruction Displays Copy Mode (Liquid Crystal Display) Indications PLEASE INSERT BATT. NO CARD Condition Insert battery. Power will not turn on without battery inserted. Insert the card. NO DATA INIT ERROR FORMAT ERROR NO CAPACITY CARD PROTECT COPY ERROR HIT ANY KEY SAFETY MODE PUT IT DOWN CAN'T USE FAT32 SDCARD CAN'T COPY SECURE FILES BATTERY LOW COPY CANCEL BATTERY LOW PC CARD CAN'T FORMAT No data is stored on the card. An error has occurred during initialization of the HDD/PC Card. Turn off the power, then reinsert the card. If error occurs again, format the card (p. 23), then reinsert it. If error still occurs, card may be damaged. An error occurred during card formatting. Re-insert card and format again. (pp. 22, 23) Insufficient free space on the copy destination disk. Delete unnecessary files, or insert a card with sufficient free space. The card is protected. Cancel the protection to resume operation. Refer to documentation provided with the card. An error occurred during copying. Press any key, then reset the unit (p. 52), or turn the power off, then back on again and repeat copying operation. The HDD SAFETY Detection Switch has activated and the HDD has stopped for protection. Place the unit on a flat, level surface. SD Memory Cards formatted to FAT32 specifications cannot be used. "Format?" will be displayed. Transfer desired files to PC, then format the card. (pp. 22, 23) Secure data files (audio files that include copyright restrictions) cannot be copied. The battery is spent. Copy operation will stop and power will turn off. Recharge the battery. The battery is spent. The copy operation will be canceled and the power will turn off. Then recharge the battery. The PC Card cannot be formatted. 50