Panasonic SVPT1PPS SVPT1 User Guide - Page 54
Symptom, Correction, Set TV input to Video. See TV manual.
View all Panasonic SVPT1PPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Before Requesting Service Symptom Correction No images are displayed, even though this unit is connected to a TV... • Set COPY/TV MODE to "TV." • Connect video cable properly. • Set TV input to Video. See TV manual. • The USB cable must be disconnected to view images on a TV. • Confirm that TV format is NTSC from Copy mode. Images cannot be displayed... • Insert card correctly. • Files with extensions other than .JPG, .TIF and .MOV, and files that contain corrupt data, cannot be displayed. • To view images within folders, open a folder, then select .JPG, .TIF, and .MOV files. • Some files take longer to display. Video images cannot be played • Only the first frame of QuickTime format data back... can be displayed. Data cannot be read or written using USB connection... • When the USB cable is connected, ensure that the battery has been installed then connect the AC adapter. • Connect USB cable properly. • Select a read or write destination card. PC Card HDD data cannot be read or written... • Correctly install PC Card HDD in this unit. • If HDD SAFETY Detection Switch was activated, place unit on flat, level surface. • The PC Card HDD is a precision hard disk drive. If it is dropped or receives a strong impact, malfunction, damage, and loss of stored data could occur. If read/write errors occur or operation is abnormal, a backup should be performed immediately, using the ScanDisk/ CheckDisk function. Insufficient free space on card... • Confirm card capacity on a PC as some data on the card cannot be displayed using this unit. • If Backup is set to on, available space is reduced by half. No presentation folders can be found... • For a PC Card HDD, be sure specified saving destination name is in the form of "CARD****". • Do not change folders to unrecognizable names. Computer does not start up... • Be sure USB cable is not connected to the unit. 54