Panasonic SVPT1PPS SVPT1 User Guide - Page 52

Warning and Instruction Displays TV Mode (TV Screen Display) Indications COPY ERROR DELETE ERROR PROTECT ERROR CAN'T READ SETTING FILE CAN'T DISPLAY Condition The specified operation did not execute correctly. Reset the unit (see below), or turn power off, then back on and repeat the operation. An image file could not be displayed. The file is corrupt or the format is incompatible. FOR HDD SAFETY PUT UNIT DOWN The HDD SAFETY Detection Switch has activated and the HDD has stopped for protection. Place the unit on a flat, level surface. THIS FILE ISN'T EXIF CAN'T SAVE THIS FILE NO SUPPORT FAT32 SD CARD Rotated images cannot be saved. SD Memory Cards that have been formatted to FAT32 specifications cannot be used. CANNOT SELECT Folders cannot be selected for Slide Show. Open a folder, then select files. BATTERY LOW The battery is spent. Operation will be canceled and power will turn off. Recharge the battery. COPY CANCEL BATTERY LOW The battery is spent. Copy operation will stop and power will turn off. Recharge the battery. NOT SELECTED The operation timed out due to no selection during a Slide Show, presentation, copying, deleting or file protecting operation. Repeat the selection. BATTERY LOW PLEASE POWER OFF Battery level is getting low. Turn off the power and recharge the battery. DELETE EXCEPT PROTECT AND CAN'T VIEW FILE Protected files and files that cannot be displayed cannot be deleted. CARD IS WRITE PROTECTED Card or file is protected. To continue the operation, remove the protection. Reset Function If an error occurs during an operation and the unit no longer works, reset the unit as follows. Press CANCEL and STANDBY simultaneously for 5 seconds. • Unit is reset. Try operation again. 52 CANCEL STANDBY