Panasonic SVPT1PPS SVPT1 User Guide - Page 51
For Your Information, TV Mode TV Screen Display, PC Mode Liquid Crystal Display
View all Panasonic SVPT1PPS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Warning and Instruction Displays PC Mode (Liquid Crystal Display) Indications CONNECT AC CANNOT CHANGE SLOT INSERT BATT. Condition Connect the AC adaptor. Selection cannot be changed between a PC Card HDD/PC Card and an SD Memory Card during data transfer between the unit and a PC. Wait for transfer to finish, then make your selection. Insert the battery. DISCONNECT USB PULL OUT USB CABLE MODE CHANGE PLEASE WAIT POWER OFF PLEASE WAIT SAFETY MODE PUT IT DOWN Data transmission was interrupted. Disconnect the USB cable. Check that the battery and AC adaptor are connected correctly, then reconnect the USB cable. The mode is being changed. Please wait a moment. After processing is finished, the power will turn off. The HDD SAFETY Detection Switch has activated and the HDD has stopped for protection. Place the unit on a flat, level surface. For Your Information TV Mode (TV Screen Display) Indications Condition NO CARD Insert a card. NO DATA INITIALIZE ERROR FORMAT ERROR NO IMAGE FILE NO CAPACITY COPIED EXCEPT SECURE FILES There is no data on the card or in the folder. An error has occurred during HDD/PC Card initialization. Turn power off, then reinsert the card. If error is repeated, format the card (p. 23) and reinsert it. If error persists, card may be damaged. An error occurred during formatting of the card. Reinsert the card and then reformat it. (pp. 22, 23) There are no JPEG or TIFF files in the folder that can be displayed. Insufficient free space on the copy destination disk. Delete unnecessary files, or insert a card with sufficient free space. Secure data files (audio files that include copyright restrictions) cannot be copied. (Continued on next page.) 51